Aucma CO2 Incubator Laboratory with Imported Infrared CO2 Sensor

• Customization: Available
• After-sales Service: 2 Year
• Warranty: 1 Years
• Model NO.: BPN-CRH-CO 2 Incubator
• Customized: Customized
• Certification: CE
• Structure: Portable
• Material: SUS304, SUS304L
• Type: Incubator
• Condition: New
• Transport Package: Container Load
• Trademark: Aucma
• Origin: China
• Production Capacity: 200unit/Month

Product Description

CO2 Incubator
(With Infrared CO2 Sensor)

Features:

-- Faster CO2 concentration Restoration Speed.
-- Infrared sensor can keep CO2 concentration stability and uniformity when door open frequently.
-- Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning (except water-jacketed type), and the space between the shelves in the chamber is adjustable.
-- Microorganism filter at inlet provides 99.99% filtration of bacteria and dust (Ф<0.3μm) and supplies pure CO2 into the incubator.
-- Door temperature controller prevents dewfall on glass door of incubator effectively.
-- Independent audible and visible temperature-limiting alarm system ensures experiments run safely.
-- Alarm function for temperature difference, CO2 over concentration and concentration difference, door open time, UV working status.
-- Auto-controller of fan speed to prevent damage to the samples.
-- UV light system for periodic sterilization of chamber.
-- PID controller with LCD screen ensures precise and reliable control. -- Two-layer stacking available.

Options

 

 

-- RS-485 Connector: easy to download and save all the data via RS-485 into computer, and identify problems in time.
-- High effective filter provides filtration of bacteria and dust.
-- CO2 pressure releasing valve
-- Humidity display system
-- Printer (Nested)
-- Temperature-limiting alarm system -
- Cooling system
 

 

Product Parameters

Model	BPN-80CRH	BPN-150CRH	BPN-240CRH
Chamber Volume	80L	150L	240L
Temperature Range	Ambient+5ºC ~50ºC
Electrical Requirement	220V 50Hz
Power Consumption	500W	750W	950W
Ambient Temperature	+5~30 ºC
Heating Method	Air-jacketed, PID Control
Temperature Resolution	0.1
Temperature Stability	±0.1ºC
Temperature uniformity (37ºC)	±0.3ºC
CO 2 Range	0~ 20%
CO 2 Control Resolution	±0.1%(IR sensor)
CO 2 Recovery	(Door open 30s,recovery to 5%) ≤ 3min
Temperature Recovery	(Door open 30s,recovery to 37 ºC) ≤ 8min
Humidity Method	Natural vaporizatio≥n90%
Shelves	2(pcs)	3(pcs)	3(pcs)
Interior Dimension (W ×H×D)mm	400×450×500	480×530×610	600×630×670
Exterior Dimension (W×H×D)mm	590×687×790	670×767×880	788×837×940
Sterilization method	18hrs (90°C moist heat disinfection)

1.Large LCD screen
2.Automatic control of circulating fan speed
3.Independent temperature limiting alarm system
4.Multi stage liquid crystal programmable controller
5.Can connect printer and USB

Product Description

CO2 concentration sensor

You may need to open door frequently during experiment, infrared sensor

is the best choice under this circumstances. Our infrared sensor is very

sensitive to CO2 concentration varies and it will be not affected by inside of

incubator chamber conditions, measured accurately. It doesn't like traditional

thermal probe that will be sensitive to chamber temp., and humidity that lead

to incorrect CO2 concentration data.

If open the door for 30s and close the door, within 3 min the CO2 concentration

can resume to the set value 5%.Even if there are many people use the same

machine and frequently open and close door, the inside chamber can still

maintain CO2 concentration stable and uniform.

Temperature control and monitoring system

A.Incubator temperature control system

PT100 temp. sensor keeps inside chamber temperature accurate. It can

adjust the heating power according to the temp. differences between actual

temp. in the chamber and set temp. to make sure temp. in the chamber is

accurate. It can resume experiment temp. in 3 min after user open and close

door to take samples.

B.Water jacket heating system

Water jacket heating method to ensure working chamber temperature is uniform,

when it is power off, the chamber can maintain the temp. for a long time.

C.Door heating system

Outer door ring has heating function. The temperature of door ring will be a

little bit higher than temp. in the chamber to prevent condensed water coming

from the inner glass door. It facilitates observe the experiment process, also it

avoid the biological pollution possibility due to the condensed water from the

inner glass door.

D.Over temp. protection system

It is an independent backup temp. control system besides the CO2 incubator

temp. control system. When the incubator temp. control system failed and

caused temp. lose control, the chamber temp. reaches to the over temp.

limiter set value, over temp. protection system will cut down the heating and

alarm audible with light.

Documentation and failure diagnostic display (Option)

All data can be stored through RS485 port, if any failures, user can read the

diagnostic message and data from computer at any time.

 

Pollution proof control

A.Ultraviolet sterilization

The ultraviolet lamp is placed at the back top of the chamber. It can sterilize the chamber regularly. It kills

chamber recycle air bacteria and float bacteria from water tray or slop water in the bottom, effectively

prevent pollution during cell culture period.

B.HEPA efficient filters

The CO2 gas quality is a important factor to judge cell culture in the CO2 incubator. HEPA high efficient

filters can filter bacteria and dust in the air. It eliminates cross contamination from outer air to incubator

chamber air and keep the chamber inside aseptic. Close the door for 5 min, inside air can fast resume to

hundred grade clean. HEPA air filter is easy to disassemble without any special instruments.

C.Micro biological HEPA filter

CO2 access port equips micro biological HEPA filter, it can filters diameter ≥0.3um Particles like CO2 gas

bacteria and dust, the efficient reaches to 99.99%.

Cycle fan speed adjustable automatically

Cycle fan speed can be adjusted automatically. When chamber temp. is stable, the fan speed will be lower down, the speed will

be adjusted to a suitable speed that the cell can growth. It avoids the fast fan speed that evaporating the samples.

CO2 inlet control system

We supply pressure release valve together with the equipment. It can control the pressure stable.

The system has pressure protection function, it prevents over pressure or low pressure to the pipes.

Safe Functions

High and low temp. and over temp. alarm Chamber sensor failure alarm

Door temp. sensor failure alarm Over temp sensor failure alarm

CO2 condensation too high or too low alarm Independent temp. limiter alarm

Door open too long alarm Disinfection and sterilization status reminder

 

 

 

Our Advantages

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ

Q: How To Order ?
A:   Step 1, please tell us what model and quantity you need;
      Step 2, then we will make a PI for you to confirm the order details;
      Step 3, when we confirmed everything, can arrange the payment;
      Step 4, finally we deliver the goods within the stipulated time.

Q: When will make delivery ?
A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.

Q:After-sales Service
A: 1 year warranty for all kinds of products;
    If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.

Q: Transportation
A: Transported by DHL, UPS, EMS, Fedex, Air freight. sea freight.

Q: Is OEM service available.
A: Most of the products are available for OEM customization.

Q: How about quality of the goods?
A: Since the establishment of our company, relying on the superiority of the state-level technical center of Aucma Co., Ltd , such as refrigeration technology, digital control technology and intelligent integration technology, environmental protection and so on. We aimed at the domestic and international research & medical equipment market.